GARDEN POD

A compact garden pod in one 3D configurator -- an outdoor kitchen or a backyard gym in the same timber box. Pick 3, 4 or 5 modules, tap the + over each one to choose what goes there, and open the front on the slider below. It is a buildable design: every stud, board, pipe, cable and screw in the model is a real catalog item, so the priced bill of materials, the cut list and the assembly steps follow every change.

• 1 Kitchen -- A closed timber box whose whole front lifts on gas struts into a roof over the counter. It stands on ground screws, precast pads or concrete footings, with horizontal, vertical or board-and-batten cladding and a standing seam, EPDM or green roof. Inside, stainless cabinet modules on a timber or steel frame under an acacia, concrete or granite worktop: tap each module to fit a built-in gas grill, a sink with a tap, a kamado, a side burner, a pizza oven, a fridge, drawers, doors or a trash drawer.
• 2 Fitness -- The same box as a backyard gym: rubber flooring on the deck and a station in each module along the back wall -- adjustable dumbbells on their stand, a barbell on wall hooks, a heavy bag, a folding treadmill or a folding rower stored inside. A pull-up bar with gymnastic rings is fixed to the outside of the end wall, and you train under the open front.
• The services are drawn and counted too: in the kitchen an LPG bottle in the cabinet under the grill with its regulator, manifold, gas lines and valves, and the sink's water supply and waste; in both an outdoor socket, a switch, wall lights and an LED strip under the front beam -- each run up to the point where your home's connection meets it.
• Step-by-step assembly for every model: each group of parts goes in, then the bolts and screws that fix it, with a cut list and a PDF to take outside.
• Stand the finished piece in your yard at full size in augmented reality, straight from your phone.
• Instant, itemized bill of materials with real supplier part numbers, in metric or imperial -- down to the last screw.